Replace Lock in UPVC Door
If you have a upvc door lock that isn't working properly you should call in an expert locksmith. They are fast efficient, reliable, and will complete the task to an excellent standard.
The process of changing a barrel lock made of upvc isn't a difficult task. You just need to know what is involved and follow the steps below.
Take off the barrel lock.
Upvc windows and doors are extremely common in a variety of properties. They are great for allowing sunlight into your home and are simple to open with the right key. It takes just five minutes to replace the barrel of a lock on uPVC uPVC. It's a quick fix if you've lost your keys, a tenant has moved out and not returned it or the barrel of the lock is damaged.
The first thing you have to do is remove the screws that hold the handles. This will allow you to move the handles away from the way to access the lock barrel screw. Be careful not to loosen the screws too fast as this could cause damage to the handles or cause them to fall off while working.
Once the screws are removed After removing the screws, look for the screw inside the door that is holding the lock on the barrel. This screw stands out and is a different color to the screws on the door. Take it off by using the Phillips screwdriver. Then, grab the present key that is used for the lock and place it inside the barrel. Turn it as far to the right as you can. This will open the barrel and make it easier to open the door.
After you've loosen the screw and you're ready to break the pins that support the euro cylinder in place. You'll require pliers with strength or mole grips to do this. Take the protruding portion of the euro cylinder, and bend it from side to the side and up and down. This will break the support pins that hold it in place.
Installing the new cylinder can be completed after the previous one was removed. First, you will need to determine the size of the lock cylinder to ensure that you've purchased the right replacement. This can be accomplished by measuring the distance from the center of the circular portion of the keyhole to the center of the square spindle. The measurement should be taken at the top of the spindle.
Changing the Cylinder
The main locking mechanism is an euro cylinder. It is simple to replace and doesn't require a handyman or locksmith. In fact, if the lock you have isn't anti-snap or anti-bump it should be changed to one that has this protection built-in. They are incredibly inexpensive and could save you money as well as inconvenience in the event that your locks have been compromised by these security threats.
Open the door and stand in the front of it. This allows you to reach the handle retaining screws by hand or using an appropriate tool. Let it loosen a bit, maybe just a quarter turn to start the process.
After this is completed the cylinder will come out easily as it will no longer be held in by the screw. The next step is to determine the size of the replacement cylinder you require. There are approximately 25 different sizes. You should bring your old cylinder when you buy one new to ensure it is the right size.
If you're not sure of the dimensions then take a measurement from the center of the screw hole to the end of the cylinder. This is the only way to be sure you're getting the right sized cylinder for your upvc doors.
Once you have the replacement cylinder ready, insert it into your door in reverse order to the way you took out the old one. It could be difficult to align the lock cam but this is usually just an issue with alignment, and will eventually be sorted out.
The next step is to insert the long securing screws. After that, you are able to test it to ensure that the cylinder is secure within the door. If you are happy that it is, you can now re-attach the handle and close the door to check again. If all is good, your cylinder lock in your Upvc door has changed and you should have added another layer of security to your home.
Switching the Handle
There are many reasons a door knob may become loose. It could be due to the wear and tear of the handle or the square spindle inside the handle. In this instance the door handle has to be replaced.
Firstly it is important to ensure that the door is propped open and won't close in between taking off and replacing the handle. Remove the screws from the inside surface of the handle plate with the help of a screwdriver. This will release your handle from the plate. Do not lose the screws, as you will need to re-screw them later.
It is now possible to remove the handles to gain access to the cylinder lock inside the door. This will have a round or bulb-shaped cylinder. It is only found in multi-point locks on upvc doors, as well as some doors made of aluminum. Changing the cylinder is much the same as changing the handle except you'll have to remove the old cylinder from the door and replace it with a new one.
When choosing the replacement handle, it is important to think about its size. Make sure the handle is identical in size to the original one as it will have to be able to slide over the existing screws that keep the handle in place. You can start by consulting a size table that provides the most popular sizes of replacement handle plates and their keyhole centers.
It's also worth upgrading your handles on your doors made of upvc to more secure standards, like the Sold Secure SS301 or a 2* Kitemark set of security handles. This will enhance the security of your home and making it easier to operate the door. These sets are slightly more expensive however the added security and peace of mind is worth the cost. You don't want to have to push the door handle continuously up and down to open and close it.
Change the Lock
The lock on your uPVC door can be a target for thieves. Upgrade your uPVC to a multipoint locking system to ensure it's secure. This will include an open hook as well as deadbolts to ward off burglars. www.repairmywindowsanddoors.co.uk can help you with this, however it is also possible to do the job yourself. You will need a few tools, but the process is easy and quick.
The first step is to loosen the screws that hold the handle in the position. You can remove the screws using a screwdriver and store them in a safe place. Then, you can lift the handle to reveal the screw holding the cylinder in position. You can unscrew this screw and replace it with a new one. Make sure the screw you choose to replace is of the same size as your original. It must be aligned with the barrel of the lock.
Changing the lock of your uPVC door can be a challenge. You depend on it to protect your home, and making a mistake could result in you not being able to unlock the door. If you know how, it's relatively easy and costs less than calling professional locksmiths.
You'll need to remove the inner faceplate from the lock to replace the lock. You'll need to locate the screw inside the door, and the retaining bolt outside the door. Once you have access to these screws, you can remove the faceplate and replace it with a cylindrical.
There are many reasons you may need to replace the lock on your uPVC doors. You might need to alter the lock on your uPVC doors for various reasons.
Anyone with a basic level of DIY skills can change a uPVC locking mechanism. You'll need to check the hinges inside the mechanism, which can be difficult to do when the lock is stuck. If the hinges are lubricated it is a simple repair. However, if you aren't confident doing this, it's best to call an expert.